hotairstenter.com

What is the standard for selecting the stenter for blue sky printing and dyeing?

Data:2018-09-14
Abst:Hangzhou Xiaoshan Blue Sky Printing & Dyeing Co., Ltd. is a printing and dyeing enterprise with a history of more than 20 years. With the continuous introduction of new fibers and new materials, the products of blue sky printing and dyeing have covered two major categories of knitting and weaving, with an annual output value of about 170 million. As a “dyeing heavy machine”, the tenter setting machine is an important factor to ensure the quality of the printing and dyeing enterprises, and their applicability to the equipment is getting higher and higher....

Hangzhou Xiaoshan Blue Sky Printing & Dyeing Co., Ltd. is a printing and dyeing enterprise with a history of more than 20 years. With the continuous introduction of new fibers and new materials, the products of blue sky printing and dyeing have covered two major categories of knitting and weaving, with an annual output value of about 170 million. As a “dyeing heavy machine”, the tenter setting machine is an important factor to ensure the quality of the printing and dyeing enterprises, and their applicability to the equipment is getting higher and higher.

Energy saving and environmental protection priority
 
Yuan Shuijun, chief of blueprint printing and dyeing equipment, said that with the changes in the market and the rising labor costs, in recent years, in the domestic printing and dyeing industry, the industrial structure adjustment and the continuous improvement of the environmental protection, energy saving and intelligent demand for printing and dyeing equipment, the blue sky Printing and dyeing is paying more and more attention to high-performance equipment that can bring high profits, especially the stenter that can meet the requirements of energy saving and environmental protection.
 
According to reports, there are currently 9 stentering production lines for blue sky printing and dyeing, and equipment from domestic and foreign companies are involved. Yuan Shuijun, who has more than 20 years of experience in equipment purchase, said that in recent years, the technical level of China's printing and dyeing machinery has developed rapidly, and the gap with foreign advanced equipment is getting smaller and smaller, and the service model is more suitable for the Chinese domestic market. Among these 9 lines, The tenter setting machine of Zhejiang Licheng Printing and Dyeing Machinery Technology Co., Ltd. made him feel deeply.
 

 
The continuous technological improvement of Licheng Technology in the stenter products is more due to the rich experience accumulated in the practice process and the more effective innovation with effective communication with customers. In the exchange of Xu Zhicheng, general manager of Zhejiang Richeng Printing and Dyeing Machinery Technology Co., Ltd., a subsidiary of Licheng Technology, the reporter learned that he was the person in charge of printing and dyeing process of Ningbo Shenzhou Knitting Co., Ltd., and he was very familiar with the craft after years of work. Nowadays, these experiences have not only been concentrated on the established equipment, but more importantly, they have brought tangible benefits to the user's factory.
 
Meet the production of high-end products
 
According to Xu Zhicheng, Licheng's setting machine has already made a name for itself in high-end product manufacturers. At the end of 2017, Ningbo Shanshan Co., Ltd. ordered a prototype machine for the processing of its export products. As a supplier of high-end products in Japan, Shanshan has a full product chain from cotton fiber to ready-to-wear. As one of the industry benchmarking companies, Shanshan has very high requirements for product quality. It is understood that at present, Licheng's setting machine is running well in the enterprise, in line with its requirements on energy consumption and efficiency, and has achieved a good alternative to imports. It is reported that Licheng and Shanshan will continue to increase cooperation in the future.
 

 
“Licheng Technology's setting machine satisfies our needs for energy saving, efficiency improvement and automation. It is a device we need very much.” Yuan Shuijun said. It is reported that Licheng Technology's whole machine insulation panel is made of 150mm thick high-density insulation material, which can reduce energy consumption and reduce heat loss. In addition, it has effectively improved the working environment of workers. In terms of clean production, the automatic setting machine with automatic cleaning machine can effectively reduce the labor. In addition, the oven can also be selected according to customer needs, to meet the process requirements of printing and dyeing enterprises to a greater extent.
 
"Now many young people are 'working with wallets'. Therefore, the workforce is unstable, and the increase in labor costs has become a common problem for enterprises. This requires more and more work environment for printing and dyeing enterprises. We must propose equipment. Higher requirements, for example, higher degree of intelligence. Reduce labor at the same time as reducing labor intensity, and also ensure the consistency of the process, and meet the customer's requirements for the inherent specifications of the fabric's width, weight, shrinkage rate, etc. Licheng Technology The panel design makes it easy for workers to control the running efficiency of the whole machine; all parts are divided into reasonable areas according to the control function, which not only improves the efficiency of the equipment, but also ensures the reliability of the operation. The workers become more comfortable to operate.” Yuan Shuijun The use of the device is very deep.
 
In the long run, with the deepening of industrial restructuring, the era of printing and dyeing capacity, especially the expansion of low-end capacity, will never return. At present, the demand for upgrading and upgrading of equipment technology is becoming stronger and stronger. For the sustainable development of enterprises, they have positioned new equipment procurement at the high end.