hotairstenter.com

The Hot Air Stenter Can Stenter, Dry And Heat

Data:2018-12-27
Abst:...

The Hot Air Stenter is a machine or apparatus for stretching or stentering fabrics. The purpose of this machine is to stentering, drying and heat-setting and it is also used for cotton, wool, linen filament, silk, knitted or woven fabrics auxiliaries padding. It can stretch the fabric widthwise and to recover the uniform width.

Functions of Stenter Machines:

l Heat setting is done by the stenter for cotton, wool, linen filament, silk, knitted or woven fabrics auxiliaries padding

l The width of the fabric is controlled by the stenter.

l Finishing chemical applies on fabric by the stenter.

l The loop of the knit fabric is controlled.

l Moisture of the fabric is controlled by the stenter.

l Spirility controlled by the stenter.

l GSM of the fabric is controlled by stenter.

l The fabric is dried by the stentering process.

l Shrinkage property of the fabric is controlled.

l Curing treatment for resin, water-repellent fabric is done by the stenter.

Working Procedure of Stenter Machine:

The fabric is collected from the batcher to the scray and then it is passed through the padders where the finishes are applied and sometimes shade variation is corrected. The fabric is entered into the mahlo (weft straigtner), the function of which is to set the bow and also weave of the fabric is gripped by the clips and pins are also provided but the pins have a disadvantage. The pins make holes at the selvedge but the stretching of the pins is greater than the clips. These clips and pins are joined to endless chain. Eight to ten chambers are provided on the machine and each chamber contains a burner and filters provided to separate dust from the air. The circulating fans blow air from the base to the upper side and exhaust fans suck all the hot air within the chambers. Attraction rollers are provided to stretch the warp yarn.

Technical parameters

ZCMD768 Type Hot Air Stenter is the main product of our company. Some technical parameters are as follows.

1.Car type: right-handed or left-hand drive vehicles

2.Nominal widthW):1800-3600mm

3.Nominal speed10-110m/min

4.Amplitude range: 700-W-200

5.Motor drag way: AC frequency conversion

As a professional hot air stenter machine manufacturer, Licheng also offers high-quality Flat Screen Printing Machine . Whenever you need it, please feel free to let us know.