hotairstenter.com

Several Tips of Hot Air Stenter Machine II

Data:2019-09-27
Abst:...

 

Zhejiang LICHENG Printing&Dyeing Machinery Technology Co., Ltd located in China, offering an exclusive range of Hot Air Stenter Machine which is used for several applications. Our products are highly durable and available in various designs.

Hot Air Stenter Machine is a machine or apparatus for stretching or stentering fabrics. The purpose of the Hot Air Stenter Machine is to bringing the length and width to predetermine dimensions and also for heat setting and it is used for applying finishing chemicals and also shade variation is adjusted. The main function of the Hot Air Stenter Machine is to stretch the fabric widthwise and to recover the uniform width.

Apart from what have discussed in the previous article, when you operate Hot Air Stenter, you should also pay attention to:

1.Regularly check the heat transfer oil pipeline in the oven. If there is oil leakage, it should be dealt with in time. After the shift, the fly flower should be cleaned, and the fly and oil in the exhaust pipe should be cleaned regularly to eliminate the fire hazard.

2.Add a steam pipe on the exhaust pipe at the top of the oven, which can be cooled by steam. When the temperature inside the machine is 165 °C, the steam valve is in the normally open state; the wire radiator is installed on the heat sink to prevent the flying flower or fabric from falling. The heat sink causes burning.

3.When cleaning or refueling, you must turn off Hot Air Stenter Machine. It is strictly forbidden to smash the chain, the brush board, and the rubbing roller (especially the upper and lower rolling bars) when driving to prevent the fingers from being injured. When cleaning on the machine or in the machine or repairing the car, the parking sign must be hung on the console to prevent others from driving.

4.It is strictly forbidden to place any items and food in the oven, on the distribution box and on the machine.