hotairstenter.com

Common Faults and Solutions of Open Type Rotary Screen Printer II

Data:2019-11-14
Abst:...

 

As mentioned in the above news, Open Type Rotary Screen Printer usually consists of four parts: the feeding device, the printing head, the drying device, and the falling device. Although it looks simple, we need to know what are the common problems of Rotary Screen Printer in order to be prepared for the rainy day.

Sixth, there are long traces on the rubber blanket of the common problems of the Open Type Rotary Screen Printer.

Solution: Check the glue for impurities, whether there are hard impurities or residual glue on the scraper, and deal with it immediately.

Seventh, the gas control components of the common problems of the Open Type Rotary Screen Printer are malfunctioning.

Solution: Check if the cylinder piston of the malfunctioning part leaks, check whether the pipeline and gas valve are damaged, whether the working pressure is too low, whether the compressed air is not clean, not dry, and whether the condensation force is released.

Eight, the printing problems of the common problems of Open Type Rotary Screen Printer are blurred, and the flower tube and the rubber blanket are not synchronized.

Ninth, the circular screen printing of the common problems of Open Type Rotary Screen Printer is not accurate.

There are many reasons for this situation, which need to be carefully checked, such as whether the rotary screen has loose head and shedding tendency, whether the scraper gas volume is sufficient, the paste paste is applied to the semi-product, the level of the color slurry in the rotary screen changes, and the flower device And whether it affects the parts of the flower, whether the parts of the flower are wet or not, and whether the piled cloth is smooth or not.

Solution: Check if the air clutch is invalid, whether the rubber blanket is lengthened, and whether the worm gear is worn. Check hotairstenter.com for more information.