Questions About Open Rotary Printer


   Generally, a good screen printing plate must be dried with a hairdryer and then placed in the sun for several hours;

  Before using the silkscreen, first, check whether the patterns and fonts in the silkscreen are washed clearly. If there are some small spots on the pattern, they can be filled with patch glue;

  During the debugging process, try to keep the silkscreen plate parallel to the bearing frame of the product, and increase the pressure of the scraper slightly to ensure that the silkscreen plate will not be easily scratched;

  Generally in production, the effect of scrubbing the screen printing plate with 719 thinner is better, but do not use alcohol to scrub the screen printing plate, because there is a part of the water in the alcohol. Some smaller fonts are easy to fall off);

  A good screen printing plate can be used several times normally. If the output is small during production, the screen printing plate should be removed and cleaned as soon as possible after completion. At the same time, do not use a knife during cleaning. You can use some harder ones. paper;

  After cleaning the open rotary printer screen, make sure that the patterns and fonts in the screen are clear, and then blow it dry with a hairdryer, and then place it on the designated position.