hotairstenter.com

How To Adjust The Size Of The Flat Screen Printer?

Data:2021-10-18
Abst:...

   Today, I will introduce how to adjust the size of the flat screen printer.

  1. Adjustment of platform and guide rail

  The platform and the guide rail should be parallel, and the squeegee should move along the guide rail. If the two are not parallel, the scraper will not always contact the platform with a certain pressure, and there will even be a gap. This adjustment has been adjusted before the machine leaves the factory.

  2. Adjustment of parallelism of the guide rail, printing plate, and worktable

  If the three layers are not parallel, the flat screen printer can hardly work. It is generally adjusted based on the guide rail or platform.

  3. Adjustment of the net distance

  The distance between the screen and the product must be 2-5 mm. This is called the screen distance. Only when the screen distance is used, the printed matter can be clear.

  4. Adjustment of screen and platform

  The screen printing plate and the platform should be parallel, otherwise, the distance between the screen printing plate and the platform is inconsistent, resulting in inconsistent printing pressure of the squeegee, resulting in deformation of the screen printing plate. Therefore, the flatness of the screen frame itself should be guaranteed. Licheng screen printing generally requires users to make specific requirements according to their own needs.