Do You Know How To Adjust The Hot Air Stenter?


   Hot air stenter is one of the main products of our company. Recently, many customers have consulted us about the daily use knowledge of hot air stenter. To satisfy everyone, today we will introduce to you how to adjust the hot air stenter. Everyone is helpful.

  1. The platform and the guide rail should be parallel, and the squeegee moves along the guide rail. If the two are not parallel, the squeegee will not always contact the platform with a certain pressure or even a gap. This adjustment has been adjusted before the machine leaves the factory. Up.

  2. The screen printing plate and the platform should be parallel, otherwise the screen distance (the distance from the bottom of the screen printing plate to the printing surface) is inconsistent, causing the printing pressure and the deformation of the screen printing plate to be inconsistent. Therefore, the flatness of the screen frame itself should be guaranteed, Generally, users put forward specific requirements according to their needs. Plate adjustment: refers to the adjustment of the printing accuracy between the screen printing plate and the printed part on the hot air stenter. Height adjustment (>40mm), front and rear adjustment and left and right adjustment ( >20mm), horizontal angle adjustment (>3°).