hotairstenter.com

How Does The Open Rotary Printer Work In General?

Data:2022-01-14
Abst:...

   In fact, in many cases, the work of open rotary printers is still slowly increasing technically, and now the technology of open rotary printers is still relatively good. Because of this, the materials of open rotary printers in all aspects are also increasing. And with the development of this industry now, the work of open rotary printer is very simple, but it needs to be careful because the meticulous work is in many aspects, now the open rotary printer is still very good, and now the process of the open rotary printer is also more and more important.

  Many times, the work of an open rotary printer is important. The essence of the multi-station open rotary printer lies in the degree of specification of the design station of the production plan by the engineer. Of course, before the product scheme design, it must be determined by the customer, and the production can only be put into production after the customer has confirmed the scheme.

  In the planning, the multi-station open rotary printer must first understand the customer's location planning and product screen printing process, determine the entire machine area according to the plan, and then reserve appropriate stations in the silkscreen planning according to the screen printing process and the number of station personnel. ., to put it simply, it is how many stations are needed in a certain production link, and according to the number of stations given by the customer, the stations are reserved in the appropriate production link of the machine for production operations.

  Summary: production process + the number of stations + planning size, according to these data, open rotary printer engineers will make judgments on the rationality of the stations according to their own experience and common sense when planning a specific production plan, and will plan normally if they can. If there are doubts, it may not be good. Of course, the planners will feedback this information to the customer for discussion, and perhaps give other solutions more directly to the customer's conclusion. Usually, the process of silk-screen products is more complicated to use this kind of production map. Of course, there are some products in addition to the silk-screen process the manufacturing process can also be planned as multi-station. A multi-station open rotary printer can do this by placing several machines in one position.