hotairstenter.com

The Problem of Rotary Screen Printing Machine and Its Solution

Data:2018-11-19
Abst:...

The Problem of Open Type Rotary Screen Printing Machine and Its Solution!

1. The blanket of the common problem of the Open Type Rotary Screen Printing Machine is laterally offset.

Solution: adjust the tension of the blanket and the guide controller of the blanket or adjust the distance between the stop point of the guide controller and the micro switch (generally 2~3cm). If there is a horn sound, stop immediately and trace the cause until As far as troubleshooting is concerned, remember that you cannot continue to operate.

2. The rotary screen printing of the common problems of the rotary screen printing machine is not accurate.

There are many reasons for this situation, which need to be carefully checked, such as whether the rotary net has loose head and shedding tendency, whether the scraper gas volume is sufficient, the paste paste pastes the semi-product, the level of the color slurry in the rotary screen, and the flower device And affect whether the parts of the flower are loose, the dry and wet conditions of the printed semi-products and the smoothness of the stacking.

3. There are long traces on the blanket of the common problem of the rotary screen printing machine.

Solution: Check the glue for impurities, whether there are hard impurities or residual glue on the scraper, and deal with it immediately.

4. The air control components of the common problems of the rotary screen printing machine failed.

Solution: Check if the cylinder piston of the malfunctioning part leaks, check whether the pipeline and gas valve are damaged, whether the working pressure is too low, whether the compressed air is not clean, not dry, and whether the condensation force is released.

5. The printing lines of the common problems of the rotary screen printing machine are blurred, and the flower tubes and the rubber blankets are not synchronized.

Solution: Check if the air clutch is invalid, whether the rubber blanket is lengthened, and whether the worm gear is worn. Choose a professional rotary screen printing machine manufacturer is important, I recommend you click Hot Air Stenter for further information.